Tu peut mettre que ton portable t'avertissent quand on ecrit sur se topic? O_o
Bon concernatn les portables, je vasi me l'acheté d'ici peut et j'y est pas vraimet reflechit en plus, mais finalemtn il me faut uen carte graphique pour pouvoir utilisé des logiciel de modelisation et de calcul d'effort. je pense utilisé le logiciel catia qui demande des configurations ( et je comprend pas tout, alors dsl je vais mettre tout, pas grave si tu m'aide pas! ). Petit rappel, je voudrais quil puisse avoir acces au wifi, et je en veut pas vista!
les carasteristique du pc demandé sont :
Technical Information
Hardware Requirements
Common HW Requirements
The following requirements are common to all operating systems supported by CATIA Version 5. System unit and graphic requirements are platform specific and are detailed in the following paragraphs.
Disk drive: an internal or external disk drive (minimum recommended size is 4 GB) is required to store program executables (installation of all CATIA Version 5 Products requires 2.0 GB on Windows, 2.4 GB on AIX, 2.7 GB on HP-UX, 2.5 GB on IRIX, and 2.3 GB on Solaris), program data, usage environment and paging space.
Memory: 256 MB or RAM is the minimum recommended amount of memory for all applications. 512 MB of RAM is recommended for DMU applications on large assemblies and for the DSE product. Requirements may be greater when large amount of data are used.
Internal/External Drives: a CD-ROM drive is required for program installation and access to the online documentation, which can optionally be downloaded to disk.
Display: A graphic color display compatible with the selected platform-specific graphic adapter. The minimum recommended size for usability reasons is 17 inches. Minimum resolution for Windows workstations is 1024x768 and 1280x1024 for UNIX workstations. When selecting a graphic adapter, hardware texturing capability is strongly recommended when using CATIA Version 5 products that use texture mapping, in which case the amount of RAM has to be adequate for the number and complexity of textures to be used.
Keyboard: a specific keyboard compatible with selected installation locale may be required for national language support.
Pointing device: 3-button mouse. On Windows workstations, a 2-button mouse may alternatively be used (the third button is emulated with a keyboard sequence). The 3 button mouse is recommended for usability reasons. IntelliMouse (two buttons plus wheel) is an alternative to the three-button mouse on Windows workstations, the wheel acting as the middle button and allowing additional manipulations such as panning and scrolling.
Optional components and features: SpaceBall and SpaceMouse can be used, in addition to the mouse, to perform graphic manipulations (zoom, pan, rotate, etc.); necessary drivers are delivered with the device.
Those devices can be used with DN1 , SP1 and all CATIA P2 Products.
>The robustness of the overall solution is dependant on the robustness of the operating system and the hardware environment used. Windows and UNIX hardware configurations certified by Dassault Systemes for running CATIA Version 5 products are published at
http://www.ibm.com/solutions/plm/Although CATIA Version 5 products might run on other configurations or other graphic adapters, incidents specific to these configurations or adapters would not be accepted for support
For Windows 2000 / XP
System Unit: Intel Pentium III or Pentium 4 based workstations running Microsoft Windows2000 Professional Edition or Windows XP Professional Edition
Graphic Adapter: a graphic adapter with 3D OpenGL accelerator is required. Note that graphic performance on local transformations (panning, zooming, rotating model) will depend on the selected graphic adapter. The graphic adapter should have the following capabilities:
24 bits, true color, double buffered visual
24 bits Z-buffer
Stencil buffer
minimum supported resolution is 1024x780; a resolution of 1280x1024 is recommended for usability reasons.
Network Adapter: an active LAN adapter (Ethernet or Token Ring, installed and configured) is required for licensing purposes.
Supported Configurations on Windows2000 and Windows XP: an updated list of hardware configurations, certified at Dassault Systemes for running CATIA Version 5 products, is published on the CATIA V5 Web site at URL:
http://www.ibm.com/solutions/plm/ Windows x86-64 64-bit Platforms
>Disk drive : 2.5 GB
Memory : 4GB at minimum amount is the recommended memory .
System Unit : Intel Xeon EM64T, AMD Opteron 64-bit based workstations running Windows XP Professional x64 Edition
Supported Configurations on Windows XP Professional x64 Edition: an updated list of hardware configurations, certified at Dassault Systemes for running CATIA Version 5 products, is published on the CATIA V5 Web site at URL:
http://www.ibm.com/solutions/plm/ For IBM AIX
System Unit: any RS/6000, based on PowerPC 604 (166 MHz minimum clock speed), Power2 or Power3 or Power4 processor families, supported on AIX Version 5.2, provided that requirements described below are met.
Note :
>Since release 13 AIX 4.3 is no longer supported
>Since Release 16, AIX 5.1 is no longer supported
Graphic Adapter: one of the following graphic adapter is required:
GXT500P
GXT550P
GXT800P
GXT800M
GXT2000P
GXT3000P
GXT4000P
GXT4500P
GXT6000P
GXT6500P
For HP-UX
>System Unit: any B-Class, C-Class or J-Class workstation based on a PA8000 processor family, supported on HP-UX 11.11 (HP-UX 11i), provided that requirements described below are met.
Graphic Adapter: one of the following graphic adapter is required:
Visualize-FXE
Visualize-FX2
Visualize-FX4
Visualize-FX5
Visualize-FX6
Visualize-FX10
Fire GL-UX
Fire GL T2-128
Fire GL X1
FireGL T2-128
FireGL X3
For SGI IRIX
System Unit: any O2, Indigo2, Octane, Octane2, Onyx2, Fuel or Onyx3000 workstations based on R5000, R10000, R12000 or R14000 processors, supported on IRIX 6.5, provided that requirements described below are met.
Graphic Adapter: one of the following graphic adapter is required:
Integrated graphic adapters on O2 workstations
Solid Impact, or SI/SE
Super Solid Impact, or SSI/SSE
High Impact
Maximum Impact, or MXI/MXE
VPro V6
VPro V8
VPro V10
VPro V12
InfiniteReality
Infinite Reality 3
InfinitePerformance
For Sun Solaris
>System Unit: any Ultra1, Ultra2, Ultra10, Ultra30, Ultra60, SUN Blade 100, SUN Blade 150, SUN Blade 1000, SUN Blade 1500, SUN Blade 2000, SUN Blade 2500 or SUN Blade 1500+ (1.5GHz)workstation based on UltraSPARC processor, supported on Solaris 8, provided that requirements described below are met.
>Graphic Adapter: one of the following graphic adapter is required:
Creator3D
Creator3D Series III
Elite 3D (U10-440 Mhz only, for U10 workstations)
Expert3D Lite
Expert3D
XVR-500
XVR-1000
XVR-1200
XVR 600 ( Support of XVR-600 requires Solaris 8 H/W 05/03 and OpenGL 1.3 )
OS-related Software Requirements
Common SW Requirements
CATIA Version 5 runs on selected system levels of:
Windows 2000
Windows XP
IBM AIX
Hewlett Packard HP-UX
SGI IRIX
Sun Solaris
>Refer to the Program Directory or contact your IBM Support Center, for appropriate corrective service to apply to the software described in the following paragraphs
>Version 5 Release 17 prerequisites Orbix 3.3 on 32-bit OS
>For Windows 2000 / XP
>Minimum level required: Microsoft Windows 2000 Professional Edition, with Service Pack 4 or higher, or Windows XP Professional Edition, with SP1 or SP2, and the following components:
A Microsoft implementation of OpenGL libraries, as delivered with Windows 2000 or Windows XP. For recommendations related to driver levels based on tested graphic adapters, visit:
http://www.3ds.com/implementation/technology/windows/certified-workstations-list/ A localized version of the operating system may be required when selected installation differs from Latin 1.
>Note:
CATIA V5R17 does not support Windows 2000 Server and Advanced Server - Customers currently running V5 on Windows 2000 Server are encouraged to migrate to Windows 2003 Server
Version 5 Release 17 will be the last release to support Windows 2000 Professional Edition. Customers currently running V5 on Windows 2000 are encouraged to migrate to Windows XP
For CATIA V5 64-bit on Windows XP Professional x64 Edition
The following components at the indicated level are required:
Minimum level required: Windows XP Professional x64 Edition , and the following components:
A Microsoft implementation of OpenGL libraries, as delivered with Windows. For recommendations related to driver levels based on tested graphic adapters, visit:
http://www.3ds.com/implementation/technology/windows/certified-workstations-list/ For CATIA V5 32-bit on Windows XP Professional x64 Edition
The following components at the indicated level are required:
Minimum level required: Windows XP Professional x64 Edition , and the following components:
A Microsoft implementation of OpenGL libraries, as delivered with Windows. For recommendations related to driver levels based on tested graphic adapters, visit:
http://www.3ds.com/implementation/technology/windows/certified-workstations-list/ For IBM AIX 32 or 64-bit
Minimum level required:
AIX Version 5.2 ML7, with the following components:
IBM C Set++ for AIX Application Runtime at a minimum level of 6.0.0
IBM XL Fortran Runtime Environment for AIX at a minimum level of 8.1.1.
OpenGL and GL3.2 Runtime Environment (delivered with the operating system)
Common Desktop Environment (CDE; delivered with the operating system)
Motif 2.1 on AIX 32-bit
JRE 1.3.1
AIX Version 5.3 ML2 with following components:
IBM XL C/C++ for AIX Application Runtime at a minimum level of 7.0.0.
IBM XL Fortran Runtime Environment for AIX at a minimum level of 9.1.0.
OpenGL and GL3.2 Runtime Environment (delivered with the operating system)
Common Desktop Environment (CDE; delivered with the operating system)
Motif 2.1 on AIX 32-bit
Additional Support for AIX Run time is AIX 5.3 ML03 (on 32-Bit and 64-Bit). On Power 4 and Power 5 only
Note :
CATIA V5R17 will be the last release to support AIX 5.2 - Customers currently running CATIA and ENOVIA on AIX V5.1 or 5.2 are encouraged to migrate to AIX 5.3
For HP-UX
>Minimum level required: HP-UX 11.i(#Dec2004), with the following components:
ANSI C++ Runtime Environment (aC++, at a minimum level of 3.50)
HP Fortran 90 Runtime Environment (delivered with the operating system)
HP-UX 700 OpenGL 3D API Runtime Environment
CDE (delivered with the operating system)
A localized version of the operating system may be required when the selected installation differs from ISO code pages
For SGI IRIX
Minimum level required: IRIX 6.5.15m, with the following components:
C, C++ and Fortran77 standard execution environment (delivered with the operating system)
OpenGL (delivered with the IRIX execution environment)
IRIX Interactive Desktop (delivered with the operating system)
WorldView when the selected installation locale differs from ISO-1